| Product Type: | Construction Material Machine |
|---|---|
| Automatic Grade: | Automatic |
| Power Source: | Electric |
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
| Shandong Oyade Group | ||
| The advantages of EPS sandwich Wall Panel than traditional block | ||
| Item | New type EPS sandwich lightweight Wall Pane | Traditional AAC block |
Specification |
120mm*2440*610 | 200mm |
sound insulation |
Due to the wall as a whole panel make its performance is uniform distribution, the overall sound insulation effect is good | The wall has a lot of joints to reduce noise performance,Block masonry distribution largely affect the sound insulation effect; |
| Fire Resistance | The fire resistance limit is 2.5-4 hours,Noncombustion reached the national standard A grade,and can be used in the fireproof building. | The fire resistance limit 1 hour |
| Anti-seismic | Whether the frame or steel structure, due to the big board overall installation for use as a wall structure form, so it can be adapted to larger interlayer displacement angle and greatly enhance the seismic resistance | Requires masonry and structural reinforcement as a wall material, the seismic resistance is worse than the EPS wall panel |
| Water-Resistance Ability | The surface board is the high density calcium silicate board, core material containing water retaining agent, so it has good waterproof effect |
Non water-proof |
| Speed of construction |
1. EPS panel is Prefabricated panels, arrived at the construction site can be assembled directly on-site splicing | 1. AAC block is the standard common material, you need masonry mortar |
| 2. And each panel is very lightweight, Workers installation speed is very fast; No need to construct columns and ring beams, reinforced with auxiliary shorten the construction period; | 2. Compared with eps lightweight wall panel, installation speed obviously slower; need to construct columns and ring beam auxiliary installation, construction speed is restricted; | |
| 3. Don't need double-sided plaster and dry construction, so the construction speed is greatly improved. | 3.Need double-sided plastering and wet construction, so the construction speed is greatly affected. | |
| 4. Installation workers construction speed of 60-80 sqm / da | 4. Masonry worker masonry speed of 7-10 sqm / day |
|
| Wall quality |
The wall does not appear hollowing and cracks |
Wall prone to hollowing and cracking and other common problems of this material,later the owners prone to complaints and other issues |
Property |
Compared with the AAC block,the mainly advantage of EPS wall panel is lightweight, increasing the wall area, and it have higher strength and hardness than traditional AAC block. | Use for the partition occupied area increased by 5% than the composite light wall panel |
Use range |
It is widely used in public building, office building, hospitals, schools, high-rise residential buildings, workshop, temporary buildings,Non load-bearing exterior wall in temporary building, interior walls etc. | Partition walls, roofing |
Advantages of New type EPS lightweight wall panel machine |
||
| We have the second time mixing device, mixing more evenly; generally other factory just have one time mixing,one time mixing easily mix unevenly, we have second time mixing,increasing the viscosity of the slurry, the longer the mixing time will have the higher the viscosity; After first time mixing will discharge to the second time mixer uniform mixing, then pour into injection pump, then casting to the mold car. The biggest advantage is that when the secondary mixer mixing and the fist mixer can be fed mixing once again, this is a recycling operation, not a single operation, it greatly reducing the mixing time, improve production efficiency. |
||
| Our equipment does not require any steam curing measures, the wall plate heat dissipation temperature can reached 70 degrees, which is our core technology. | ||
| Specification | 60 series | 75 series | 90 series | 120 series | 150 series | 90 haycite series | 120 haycite series |
| Thickness (mm) | 60 | 75 | 90 | 120 | 150 | 90 | 120 |
| Length (mm) | 2440 mm-3000mm | ||||||
| Width (mm) | 610 mm | ||||||
| Density kg/m3 |
48±5 | 55±5 | 60±5 | 72±5 | 88±5 | 85±5 | 100±5 |
| Fire endurance (hr) | 1.5 | 2 | 3 | 4 | 4 | 4 | 4 |
| Raw material detailed introduction | |
| Cement | It it the basic raw material for wall panel. |
| Fly ash | 1) reduce the amount of cement 2) increase the area density of the wall panels 3) increase the fluidity of the slurry 4) It can be replaced to cement |
| EPS particle | It makes wall panel lighter, higher performance in thermal insulation. |
| Surface board | Calcium silicate board or fiber cement board. You can check which kind is available in your market. |
| Sand | Add some sand (diameter ≤3mm) improve strength of wall panel. |
| Chemical additives | It makes cement foaming, which reduce cement usage quantity |
| Note: 1Others construction rubbish, rice husk, perlite, ties, flyash and so on 2.Using normal cement, no steam curing facilities, the temperature is about 20 °C So for the wall panel's raw material, it is very widely. So this project is higher feasibility in every country |
|
| Machinery Parameters | |
| Configuration: | Automatic metering system |
| Capacity | 20,000sqm~600,000sqm per year |
| Thickness | 50-250mm thickness. |
| Length | 2440~3600mm, |
| Width | 610mm , |
| Raw materia | There are mainly two different types |
| 1. Cement+fly ash/eps/ceramsite/sand | |
| 2. Foamed cement+additives | |
| Finished board type | 1. Composite board/sandwich board, with surface board |
| 2. Lightweight solid panel, without furface board | |
| Surface board types | 1. Calcium silicate board |
| 2. Fiber cement board | |
| 3. Mgo board | |
| 1. | How to curing the wall panel ? |
| Normally curing time is 8-12hours , it can adjust according to your local temperature , also need natural curing around 25-28days before use it . | |
| 2. | Q: How long is the warranty of your equipment? |
| A: 1year ,but we will provide after-sale service the whole life cycle | |
| 3. | Q: Do you supply spare parts? |
| A: Excellent easy broken parts support for buyers. Easy broken parts guarantee for one year. Other parts we will provide price list in advance . |
|
| 4. | Q: Will you provide trainning and formula? |
| A: The training is free of charge , and our engineer will be on duty to train your worker until they know how to produce qualifyed product .Also we will provide you qualified formula | |
| 5. | Q: How will you provide installation&commissioning |
| A: Will provide 2~8persons(adjustable according to the degree of automatic )for installation.Engineers team will go with your project. , besides we only need 15days for commission .in this way can help you save cost on raw material and time . |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}