Product Description
The EPS light weight panel production line mainly have these parts foaming system, storage system, automatic conveying system, automatic measuring system, mixing system,Casting system, demolding system.The lightweight wall panel machine is not like other machine, it is very flexible, it means if the capacity is small at the beginning , could just buy one or two mold car; if in the future, the market demand is increasing and you want to increasing the capacity, then just buy more mold cars. So the investment is also very flexible, so more customers like invest this project.
Lightweight wall panel feasibility study info
Lightweight and energy-saving composite wall panel is made of industrial waste fly ash, slag, ceramics, portland cement and EPS foam particles as the main raw materials. The production process is simple, the cost is low, and the economic benefits are considerable.
Housing and human beings are the most inseparable. They are long-term durable consumer goods, and they are also the most expensive and largest human products. This requires that the source of raw materials for the production of wall panel must be rich and extensive. The wall panel uses industrial waste fly ash, slag, and EPS foam particles as the main raw materials, which are both waste-reducing and pollution-reducing; at the same time, low-cost ordinary chemical raw materials are used as the main raw materials, and both raw materials are abundant and widely sourced.
Finished panel
This kind of machine could produce 4 kinds of panel
| Panel thickness |
Panel width |
Panel length |
Quantity(block/each car) |
Sqm/car |
| 50 |
610 |
2440 |
66 |
98.2 |
| 60 |
610 |
2440 |
58 |
86.3 |
| 75 |
610 |
2440 |
48 |
71.4 |
| 90 |
610 |
2440 |
42 |
62.5 |
| 100 |
610 |
2440 |
38 |
56.6 |
| 120 |
610 |
2440 |
34 |
50.6 |
| 150 |
610 |
2440 |
28 |
41.7 |
| 180 |
610 |
2440 |
24 |
35.7 |
| 200 |
610 |
2440 |
20 |
29.8 |
Vertical mold car
Vertical mold car could produce compostie wall panel and Solid core panel. For Vertical mold car, the biggest advantage is the capacity is large. eg For 2440×610×100mm,one vertical mold car could produce 38 pcs.
Our vertical mold car is the double fuctional. From the picture you can see there is the the steel plate, so it could help customer produce both the composite wall panel and Solid core panel.
T&G Alluminum Alloy
We could also do 4 Edges T & G to meet customers' application requirement.
1. Cement, fly ash are conveyed to metering silo by screw conveying, and then to the mixer.
2. EPS raw material after foaming through the fluidized bed conveyor to the storage silo, volume
measurement, though air conveying system to mixer;
3. Sand and other additives through the lifting device, to the mixer
4. After mixing, through the pumping device, to the mold car.
5. curing 8hours in the mold car then need demolding, unloading the mold.
6. Stack, natural maintenance for 28 days
Application
Internal walls;
External walls;
Roof
Floor
This video shows the detailed info about how to install the wall panel
https://youtu.be/I7jUUJXQGdc
Advantage of eps concrete wall panel
The biggest advantage is that it could replace the blocks.
How could one new product be accepted by people ? Only the product could help people save time, save energy, much more convenient, price is relatively cheaper than the old one. now for the construction materials, people mainly use block. This kind of machinery produce the bigger panels, mainly used to replace the blocks.
This video could help you better understandign how this production line works.
https://yurui2018.en.made-in-china.com
Overseas project
Now we have the finished project in UAE, Qatar; Philippines; Malaysia; Ecadour; Russia etc.
Advantage of our machine
1. Automatic raw material feeding --metering -mixing system , accurate measurement to ensures proportion stability
2. We have double function mould car , it not only can produce composite ,also can produce solid panel to suit market demand . moreover,our solid panel technology is No.1 in China.
3. The double functional mold car could produce the 4 edges the T & G, we already have the project for this kind of edge requirement
4. Our mould car surface plate used cold roll steel plate , so that can guarantee the wall panel are straight ,besides the plate is
durable
Contact info
Tel: 8617853992126
){kind=link}
){kind=link}