Sandwich Panel Machine Line for Cement Wallpanel Production Line

• Customization: Available
• After-sales Service: Provided After Sales Service
• Warranty: 2 Years
• Model NO.: Wall Panel Making Machine
• Product Type: Cement Wall Panel Making Machine
• Automatic Grade: Automatic
• Power Source: Electric
• Screw Design: Cement Wall Panel Making Machine
• Certification: CE, ISO, Cement Wall Panel Making Machine
• Customized: Customized
• Application: Cement Wall Panel Making Machine
• Wall Panel Size: 2440*610mm
• Wall Panel Thickness: 50-200mm
• Raw Material: Cement Flyash Sand Water EPS
• Capacity: 300000 Sqm Per Year
• Factory Area: 1000 Sqm
• Automation Degree: Full and Semi Automation Degree
• Loading Port: Qingdao, China
• Market: Middle East, South American, African
• Factory Location: Jinan City Shandong Province
• MOQ: One Set Mold Car
• Oyade History: More Than 14 Years
• Formula: Engineer Can Provide Formula for You
• After Sales Service: Formula, Train Workers
• Mold Car: Vertical Mold Car and Horizontal Mold Car
• Main Market: Middle East South American
• Transport Package: Export Standard Package in 40FT Container
• Specification: based on production capacity
• Trademark: OYADE
• Origin: China
• HS Code: 6810999000
• Production Capacity: 500 Sets Per Year
• Package Size: 20.00cm * 20.00cm * 10.00cm
• Package Gross Weight: 2.000kg

Product Description

Product Description

Dear customers To build house in faster speed, it is a main trend in every country. So if you are in construction business, you must be looking for new type construction material to replace bricks and block!

The Lightweight eps cement panel is the exact product you are looking for!
It has obvious competitive advantages in this industry than bricks and blocks! 


1 The weight is more lighter

2 The thickness of wall more thinner

3 More easy to install, take a modular assembly, saving installation time

4 Higher strength, more anti-aging

5 Higher energy efficiency

6 More waterproof  The fireproof performance meets the national A standard and it is non-combustible;

1.Fireproof performance
Lightweight partition board under the high temperature of 1000°C, fireproof stands more than 4 hours, and do not send out harmful gas, non-combustible fire-resistant performance reach grade A standard.


2.Water proof, moisture resistance
Lightweight partition board panel with good performance of waterproof, moisture proof, never appear loose, deformation due to damp, fall off, repair, intensity drops wait for a phenomenon


3.Sound insulation
This product belongs to the lightweight composite structure, the board of internal material, board with board between concave and convex connection is good to attract and with sound insulation function, also has sound insulation and sound-absorbing function, the sound insulation quantity of 120 mm plate is 46db, its sound insulation effect compound sound insulation meets the requirements of national housing, much higher than other masonry wall sound insulation effect.

4.Heat insulation and heat preservation
The lightweight partition board composed of high purity quartz powder, inorganic fiber and plant fiber by high temperature and high-pressure steam curing, with its own honeycomb briquet structure ensures its good thermal insulation function.


5.Quick installation and short construction period
Our lightweight partition board is fully dry operation, 4 m below the height of the wall, the average skilled workers skills to install 30 square meters a day. And don't need a plaster, compared with traditional block efficiency could be improved by more than 13 times. Wall space can arbitrary slot, cutting, increases the use value of the material itself, greatly reduce the cost of the material. Shorten the period and improve the efficiency.

6.Environmental friendly and energy saving.
Our light wallboard materials do not contain harmful substances, no radiation to human for 100% sure.




Dear customer, to produce this new types cement panels, its investment is very flexible!
More details of wall panel machine 
 

Machinery Parameters
Configuration:	Automatic metering system
Capacity	20,000sqm~600,000sqm per year
Thickness of cement panels	50-250mm thickness.
Length of cement panels	2440~3600mm,
Width of cement panels	610mm ,
Raw materia	There are mainly two different types
	1. Cement+fly ash/eps/ceramsite/sand
	2. Foamed cement+additives
Finished board type	1. Composite board/sandwich board, with surface board
	2. Lightweight solid panel, without furface board
Surface board types	1. Calcium silicate board
	2. Fiber cement board
	3. Mgo board

There are two kind mold cars:
1 Vertical mold car to produce eps sandwich cement panels and solid cement panels
2 horizontal mold car to produce all the 3 kinds cement panels, especially hollow core kind

 

engineer installation

Dear customers if you can not go to China recenlty. You are welcomed to visit our samples projects in different countries! 

So far, we have many successful projects from Philippines, Malaysia, Cambodia, Qatar, UAE, Syria, Algeria,Russia, Uzbekistan, Australia, Ecuador, Mexico, Bolivia and so on. 



Qatar  project

He has been in this business the nice 2016 year. In the beginning, he can only produce 100,000 sqm per year. From 2016 year to today, he ordered more than 2 production lines from us to expand production capacity to meet his market demand. Now the total production capacity can reach 1 million sqm per year.
In the Qatar market, with this customer's promotion of lightweight cement panels, the local builders prefer to use this new kind of construction material, rather than using bricks or blocks.

In the 2019 year, our general manager Smile Gao visited this project 
Today he just shared with us some pictures from his local market-One big building, In this project, all the internal walls use this kind of cement panels. You can see so big huge demand from his local market.
 
Ecuador project

This customer visited us in 2017 years and set up the machine line in the 2018 year. He is a very professional engineer in construction material production. 
So when he saw our machine and talked with our engineers then he is very confident about us. 
Project introduction: https://youtu.be/PKYr10sL0pI
Ecuador customer has been in the construction material business for a long time. In beginning, he imported some cement panels from China. Then when his market demand is much larger, he decided to set up this production line and produce wall panels by himself, as we know the freight cost is much higher. 
In 2018 year, he can only produce 140,000 sqm per year. From 2018 year to today, he ordered more machines from us to expand his market demand. Now the total production capacity can reach 200,000 sqm per year. 
In the 2018 year, our engineers went to Ecuador to support him in installation, training workers, formula, and so on. Our customer was very satisfied with the engineers' professional ability.



Why EPS cement sandwich panel is more and more popular?

Comparison of EPS Cement Sandwich Panel with AAC Block and Hollow Block Plaster Finished
	EPS Cement Sandwich PANELS	HOLLOW BLOCK PLASTER FINISHED	AAC BLOCK
Compressive Strength-Wall Section (N/mm2)	5.5	1.3 - 3.5	3.0 - 4.0
Direct Pull-out (N)	1800-2000	Up to 710	Up to 320
Density (kg/cu.m)	520 - 810	1400 -1900	400 - 1000
U Value	0.4	2.3 - 2.8	0.3 - 0.4
Fire Rating	1.5 - 4 hours	Varies	0 - 4 hours
STC Rating	43 - 60	Up to 46	Up to 39
Joint Capacity (kN-m)	2.53 - 4.66	2 - 2.5	2 - 2.5
Panel Moment Capacity (kN-m)	1.99 - 2.96	N/A	N/A
Panel Moment Capacity (side) (kN-m)	5.58 - 7.15	N/A	N/A
Axial Load Capacity (kN)	173.8 - 283	N/A	N/A
Plaster Requirement	Not Required	Required	Required
Wet Areas	Acceptable	Acceptable	Acceptable

 

Installation Instructions

You could see that the panels are widely used in the buildings, imagine that it could save a lot of time and labor than the bricks and blocks.

 

• Single Floor House
• Two floor house villa
• Multi-floors steel structure factory building
• Multi-floors concrete structure office building
• Multi-floors concrete structure office building interior partition wall
• Multi-floors concrete structure residential building
• Multi-floors concrete structure shopping mall building
• EPS cement sandwich panel for apartment buildings
• EPS cement sandwich panel for industrial buildings
• EPS cement sandwich panel for commercial buildings

FAQ

1.	How to curing the wall panel ?
	Normally curing time is 8-12hours , it can adjust according to your local temperature , also need natural curing around 25-28days before use it .
2.	Q: How long is the warranty of your equipment?
	A: 1year ,but we will provide after-sale service the whole life cycle
3.	Q: Do you supply spare parts?
	A: Excellent easy broken parts support for buyers. Easy broken parts guarantee for one year. Other parts we will provide price list in advance .
4.	Q: Will you provide trainning and formula?
	A: The training is free of charge , and our engineer will be on duty to train your worker until they know how to produce qualifyed product .Also we will provide you qualified formula
5.	Q: How will you provide installation&commissioning
	A: Will provide 2~8persons(adjustable according to the degree of automatic )for installation.Engineers team will go with your project. , besides we only need 15days for commission .in this way can help you save cost on raw material and time .

 

Detailed Photos

Our whole service system for you to support in this business

 
Business communication→Customer visiting→Layout design→Sign contract→Foundation design & Manufacturing→Inspection&No material testing→Installation→Commissioning
Engineer after sales service 





 

Company Profile

We are a reliable facatory ! Shandong Oyade Machinery Group.

We are a group company from the 2008 year and with factory size of 66000 sqm in Jinan city, Shandong province. We have gained many patents for the cement panels machine.
Dear, the only true manufacturer can ensure you get qualified machine and also we have engineer team, who are responsible for installation, training your workers, formula and so on. 

With the qualified machine, this is only the first step for you to produce hollow-core cement panels for your apartment's construction. You also need to consider if we can support you in the formula, spare parts supply, and so on. 

For all our customers, most of them we can have a long term cooperation relationship. Such like for our domestic customers, most of them are introduced by our old customers. For example, in this city, we already have a customer using our machine to produce panels. The other customers also want to produce, so he can inquire about which machine from which factory. 
Now in China, we are a very famous brand already.  If not, we can not sell so many machines in domestic markets. As you know in one Country, the information in the same industry is almost transparent. If our machine and service are not good,  our factory can not live from the 2018 year to today. 
Contact me freely- Sherry 
I am Sherry Sun from Shandong Province, China. I love my family and my job. My son is a lovely and naughty 6 years old boy. With my family's support in my job, I am engaged much more time in my customer service.

For my working experience: my company name is Oyade  & Yurui Machinery, China. We are a group company specializing in construction material and production lines. 
With more than 6 years in this business, I am a professional in project selection; project research; marketing.
I have rich experience in helping customers do detailed analyses. After the project is confirmed, our professional team will help the customer do the installation, commissioning, and machinery maintenance, help the customer produce the finished product and occupy the market as soon as possible.

In one word, we have the true ability to support customers to set up a new factory successfully! Now with more than 80 countries, we already have successful product lines and customers!

contact Sherry

I am Sherry Sun from Shandong Province, China.

I love my family and my job. My son is a lovely and naughty 6 years old boy. With my family's support in my job, I am engaged much more time in my customer service.


For my working experience: my company name is Shandong Oyade&Yurui Machinery, China. We are a group company specializing in concrete cement panel production lines since 2008. 

Our Brand-OYADE is a famous brand in China and also in global markets.


With more than 6 years in this business, I am a professional in project selection; project research; marketing.
I have rich experience in helping customers do detailed analyses.
After the project is confirmed, our professional team will help the customer do the installation, commissioning, and machinery maintenance, help the customer produce the finished product, and occupy the market as soon as possible.

In one word, we have the true ability to support customers to set up a new factory successfully! Now with more than 80 countries, we already have successful product lines and customers!