Hot Sell Gypsum Board Manufacturing Line Plaster Board Production Plant

• Customization: Available
• After-sales Service: on Line
• Warranty: 12 Months
• Model NO.: YR-P-01
• Product Type: Pleasterboard Machine
• Automatic Grade: Automatic
• Power Source: Electric
• Screw Design: Double-Screw
• Certification: CE, ISO
• Condition: New
• Customized: Customized
• Application: Produce Gypsum Board
• Dryer Technology: Heat Transfer Oil; Hot Air
• Fuel: Coal; Diesel; Natural Gas; Heavy Oil
• Gypsum Board Thickness: 6-22mm
• Capacity: 2million ~ 30 Million
• Control System: PLC Center Control
• Installation: Guide by Our Engineer
• After Sale Service: for Whole Using Life
• Voltage: 380V 50Hz, Adjust According to Your Country
• Workers: 10-15person
• Transport Package: Use Steel Wire Rope to Fix in The Container,
• Specification: 2million ~ 30 million
• Trademark: YR
• Origin: Shandong, China
• HS Code: 8474809010
• Production Capacity: 20sets Per Year

Product Description

paper faced gypsum board machinery manufacturers

Fully automatic gypsum board production line is a special equipment for producing flat-packed gypsum board for new building materials.The production line consists of the following parts:batching system,molding system,solidification system,automatic cutting system,transfer system,distributor system,drying system,packaging system.

Special service

We provide installation/improvement/commissioning/update for small line !

Dears, if you have an production line can't work well, can't operate, your supplier didn't install/testing for you , or you want to expand capacity, or you want to change fuel, or you want to update......we provide professional team for such special service!!!\












Characteristics of the equipment
Development and application of the new high-speed mixer. High speed strring aims at shortening the gypsum slurry time (mix average within 10 seconds), helps to make full use of gypsum slurry liquidity, so don't have to add the retarder. Application of reverse discharging speeds up the pulp out of discharge, and makes gypsum fully flow in the mold. The appearance size of gypsum block has a high precision, ensuring the product quality and accuracy.
Easy to form a complete set. Except the special parts for the production line, the other parts can use the Chinese standard equipment. The quality is controlled in accordance with the ISO9001 strictly. Key electronic components adopt international famous company high quality products, guaranteeing to provide customers high quality, reliable operation of equipment.
The scale of production and the area of the plant is moderate and match the automation and the mechanization of the production line, which is easy to manage.
Less investment and mature production technology. The production cycle is short and easy to guarantee the quality of the product.



Layout of paper faced gypsum board machinery



Equipment advantages-paper faced gypsum board machinery
After years of research and development, our manufacturing is stable and reliable, accurate, saving energy and reducing consumption, and the advantages of low noise, we have 8 patented gypsum board making equipment technologies:
1. Fine workmanship, high precision, reliable quality, beautiful appearance.
2. Accurate dosing raw material, foam foam standing is our patent, produce the board of light weight, good toughness and cost savings,
3. The cutting machine uses dual-serve motor, only1 mm gap between cutting saw, saving cost .
4. We adopt the hot air circulation, drying room temperature is uniform, the board has high strength and is not fragile.
5. High electrical automation degree, low failure rate, less workers.
Manufacture strength-paper faced gypsum board machinery
As a professional gypsum board making equipment manufacturer , we have a vertical processing center, boring machines, milling machine, drilling machines, planers, argon welders and so on. Good processing equipment makeshift good machines. 

Fine workmanship                                                High precision


Reliable quality                                  Beautiful appearance

Detail parameters of gypsum board production line
 

Production capacity:2million~30 million square meter per year.

 

Final product variety:
 

(1)Common paper-faced plasterboard

(2)Fire resistance paper-covered plasterboard,

(3)Water resistance paper-covered plasterboard.

 

Product specification:
 

Board length:2000--3600mm
Board width:1200mm,1220mm

Board thickness:8--25mm

General gypsum plaster board length 2400mm,width 1200mm,thickness 9.5mm.

 

Main equipment introduction
 

Dosing System
 

Accurate dosing for each raw material. Starch mixing tank use stainless steel, with long service life and low corrosive.The foaming agent reserve tank is made of stainless steel. Foaming system adopts domestic advanced technology-Dynamic and static foaming system, ensuring the finished board is lightweight, good toughness and saving much cost.

Technology Advantage

1. The heat supply of the entire production line uses only one heat exchange, which reduces the heat loss during multiple heat transfer. It is heated by the flue gas of the hot blast stove through the heat exchanger to the temperature required for production, and then the clean gypsum board is dried by clean hot air. In the process of drying, the hot air can be fully contacted with all sides of the gypsum board for drying, so that the problem of dryness of the gypsum board can be better ensured by the problem of low heat on one side and low heat on one side.
2.  The whole process of drying is designed by using the hot air circulation method. The fully enclosed system is used in the dryer to ensure that the heat loss during the heat transfer process is minimized, thereby reducing the energy consumption requirement. During the drying process, the entire drying chamber is divided into several zones. We adjust the temperature and flow of the hot air according to the temperature required by each zone, which can save energy.
3.  The heating time is short. Only when the hot blast stove is completely burned can the temperature required for the production process be quickly reached.
4. The equipment is easy to operate and easy to control.
5. At present, more than 20 million gypsum board production lines in China use hot air dryers to dry gypsum boards.

FAQ

Q	How many projects have you installed?
A	we have installed over 100projects in domestic and abroad.
Q	How many years experience do you have in mgo field?
A	Our general engineer has around 20years experience; all others have over 10years experience.
Q:	Do you supply spare parts?
A:	Excellent easy broken parts support for buyers. Easy broken parts guarantee for one year.
Q:	Will you provide trainning?
A:	The training is free of charge , and our engineer will be on duty to train your worker.
Q:	How will you provide installation&commissioning?
A:	Will provide 2~4persons(adjustable according to the degree of automatic )for installation.

Company advantages & Contact
Rich experience
We have rich experience in gypsum board making equipment field. Our general engineer has over 20years experience, other main engineers all have over 10years experience, proficient in the newest gypsum board manufacturing plant design and manufacturing. With over 100 projects in domestic and abroad markets, we can ensure you a successful project. 
Professional teamwork
1.Sales team: 24hours online for you
2. Designing team: design the best layout for you
3. Manufacturing team: promise the best quality with high precision
4. Installation & commissioning team: finish the installation and testing of whole line
5. Process team: promise you the qualfied formula.
Excellent Service
Our company provides full life-cycle value services for gypsum board making equipment design, cost accounting, installation and operation, equipment maintenance and the whole life cycle technical support