Alpha Gypsum Powder Manufacturing Machine

• Customization: Available
• After-sales Service: Online Technical Support
• Warranty: 2 Years
• Model NO.: YURUI
• Certification: ISO 9001:2008, ISO 9001:2000, CE, ISO9001: 2000
• Control Type: PLC
• Crushing Degree: Fine Grinding Machine
• Automatic Grade: Automatic
• Dryer Technology: Heat Transfer Oil; Hot Air
• Automatic: Full Automatic; Semi Automatic; Low Automatic
• Capacity: 30,000 Tons -300,000 Tons Per Year
• Control System: PLC Center Control
• Voltage: 380V 50Hz, Adjust According to Your Country
• Factory: Linyi City Shandong Province China
• Technology: Hot Air Boiling Furnace Technology
• Installation: Guide by Our Engineer
• Fuel: Coal; Diesel; Natural Gas; Heavy Oil
• Transport Package: Seafeight Package
• Specification: Standard or Customized
• Trademark: YURUI
• Origin: Shandong
• HS Code: 8474209000
• Production Capacity: 100 Sets Per Year
• Package Size: 300.00cm * 200.00cm * 100.00cm
• Package Gross Weight: 210.000kg

Product Description

 

Detailed Photos

 

Introduction of Gypsum powder production process 
 

Natural gypsum generally includes dihydrate gypsum and anhydrous gypsum. In order to get the valuable materials, generally, we get semi-hydrated gypsum through heating the dihydrate gypsum. Here is the process:

 

The calcined semi-hydrated gypsum powder can widely be used for plasterboard,decoration board, gypsum block, stucco gypsum, and molding gypsum, etc.

Product Parameters

Paramater of Gypsum Powder Machine line 
 

Product Name	Gypsum Powder Production line
Annual capacity	15,000 to 500,000 tons
Working time	24h/day ,300day/year
Raw Material Gypsum Type	Natural gypsum ore
Gypsum powder Mesh	Within 220 meshes
Heating method	Hot air boiling furnace or rotary kiln
Application of the powder	Building material like to produce gypsum board , To make plaster of paris , to make gypsum cornice or ceiling
Degree of automation	Fully automatic
Final product specification	Gypsum powder
Fuel for the heating system	natural gas,coal,diesel,heavy oil,light oil etc
Packing method available	1-Packing machine 1-2 mouth 2-Rotary kiln packing machine 3-Iton bag packing machine
Finished powder bending strength	2.7 Mpa
Finished powder compressive  strength	5 Mpa

 

Equirpment Deatils

 

Coarse Crushing System 
 

The crushing system can crush large ore from mine mining to an average granularity of 25 mm by one time, is an ideal version of traditional ways of two and three stage crushing.

The coarse crushing system is mainly composed of storage hopper, vibrating feeder, single section crusher, elevator, and coarsebin equipment.

Grinding System
 

Mainly composed of de-ironing separator, electromagnetic vibration feeding machine, mill and powder collector device.
 

Electromagnetic vibration feeding machine characteristics:
1. Electrical control adopts controllable silicon half-wave rectifier circuit, can infinitely adjust the feeding quantity and be used for automatic control of production process, so as to realize the automatic production.

2. Without rotating parts and components, it doesn't need the lubrication, ensuring its simple structure and easy maintenance.

3. Materials is handled in micro throwing motion, ensuring small abrasion to the chute.

4. The chute is made of alloy steel plate, so is applicable conveying high temperature, badly worn and corrosive materials, etc.
 

Mill characteristics:
1. The complete machine is made into vertical structure, with small footprint, strong systemic, forming an independent production system from the rough machining of raw materials to conveying, powder process and final to the packaging.

2. Unique design of intilted air channel. This design ensures that materials entering the shell will fall in the grinding chamber along the slope.

3. Arranger adopts enclosed gear box and pulleys, with stable and reliable operation.

4. Mill important parts are made of high quality castings and proximate matter, sophisticated technology, rigorous process, ensuring the durability of the whole equipment.

5. Electric system adopts centralized control, milling workshop can almost achieve unattended operation.
 

Boiling Furnace


In view of the increasing quality requirements of powder used in the existing diversified terminal markets, the fluidized bed calciner is the most stable calcining equipment in the current low-temperature steam calcining process.

The lower the steam temperature, the more obvious the advantage. The bed state of the gypsum fluidized bed calciner belongs to the bubbling bed, so this furnace is figuratively called a "boiling furnace".

The fluidized bed calcining part is a vertical box container with a gas distribution plate at its bottom; the purpose is to support the solid powder to prevent leakage when it stops working, and to allow the airflow to enter the bed evenly from the bottom when it is working.

 

Totary Kiln

The dryer machine is used to remove the crystal water of gypsum, which is the main part of the production line.
The raw materials entering the rotary kiln should ensure that the granularity is as uniform as possible and that the dewatering time and temperature are stable. This is the key condition for a better control of the calcination quality. This is our strong point.

Finished products packaging and storing system:

Composed of the elevator, impeller feeder, finished product warehouse, packing machine and other equipment.
 

Finished product warehouse Characteristics:

1. Having many characteristics, such as waterproof, moisture proof, easy to use, etc.;Size can be produced according to customers' requirements.

2. Generally of drum support structure, adopting quality carbon steel. Its upper has dust removal equipment, preventing dust leakage; arch breaker is equipped underneath to prevent powder agglomeration, making the powder discharge smoothly, and is equipped with material level sensor equipment, may control warehouse material usage at any time .

 

 

Hot air boiling furnace & Thermal oil Boiling furnace Technology Comparison

 

1 When you switch on and off the production line oftenly:

Thermal oil Technology: When you use this technology, the production line switch off, and he oil is still very hot, about 200 degrees The heat from the oil will take too much time to cool.

 

1) After machine off, the raw material stopped to add: during this cooling time, the heat of oil will be transferred to the exising gypsum powder inside of the furnace. So with too much heat, the powder will be burnt out.

2) When start again , when add some new raw gypsum, then the Calcined gypsum and raw gypsum will all be mixed together.

Then the finished gypsum powder is so uneven.

 

The oil total about 2-3 tons for one production line, with temperature of 200 degree. So when the production line switch off, all these heat will release to the gypsum powder in the boiling furnace. also the release time is very long.

This is why this technology, it is not suitable for some customers that often switch it on and off all the time. 

 

Hot air technology: As when it switches off, It is warming rapidly, cooling faster.  So this technology is easier for customers to switch on and off the production line often. 
 

 

2 The danger of Thermal oil technology:

Sometimes if workers do not notice that the circulation pump of oil does not work, so the hot oil in the tube is heating all the time and not keep cycle status. In this situation, it will happen big explosion.

At beginning the tube of oil will not have leakage oil problem, but after several years of operation, the tube will be aging so it will leak oil and then the dangerous fire will happen in near future.

 

Regards hot air technology no need oil and such kind of problem will not happen, the whole equipment for hot air technology is easy and with less maintenance.

 

3 The gypsum powder industry development:

Before the 2010 year, thermal oil technology was mostly used in China. After 2010 year in China, more and more customer choose the hot air technology as their frist choice. 

Both technology are very mature for gypsum powder production now . 

 

4 For the thermal oil technology: 
 It needs the thermal oil boiler and thermal oil. The boiler is one set of signal boiler, so after you receive it, it can be used directly, no need special treatment in your warehouse.  

 

For the hot air technology, the combustion chamber, it needs to be built with Fire-resistant bricks on your site by our engineer.

Like you said the OMV has rebuilt the combustion already. It is mainly because the bricks have drop down which caused by the light oil sticks on the bricks. Such kind situation very less happens to other projects.

For this part, also we have made some update. such as the brick size was 11cm. Now we are using 23 cm bricks which is bigger twice than before.

 

Company Profile

What we provide is not ONLY the machine BUT the whole system.

Yurui (Shandong) Machinery Co., Ltd, is an enterprise integrating gypsum projects R&D, design, Manufacturing, exportation, installation, and commissioning.
We have been deeply engaged in the field since 1998, setting up 100+gypsum projects domestic and abroad. Our engineers group who only serve for YURUI left a full footprint over Africa, Asia, and south America, total of 20+countries. We hold different projects in each area, offering case visiting on-site. Besides we developed online visiting which breaks the limit of the virus.
1.We are not a machinery provider, but an overall solution provider.
2.We focus on the demands of users, never stop updating, improving, and surpassing.
3.We pursue extreme cost performance, not only price.
 

Project Case

 

Case1:

Project name:Natural gypsum powder&board project
Project capacity:

Gypsum powder line: 150000 ton
Gypsum board line : 10 Million sqm/year
Project technology:hot air technology
For this project, our Chief engineer has only taken 5 days to run the whole gypsum powder production line and put it into production after installation, and our customer also felt surprised on it. While some manufacturers need more than one month to finish it or even some are unable to run it for production.

Case2:

Chemical gypsum powder&POP project

This is our chemical gypsum powder project in South Africa. The customer is a well-known local building material supplier. The
owner has been in the phosphogypsum industry for more than 40 years.

project capacity:
Gypsum powder line: 50000 tons/year
Plaster of Paris line: 30000ton /year

 

Case 3:

project name:Chemical gypsum powder&POP project
project capacity:400,000 tons/year-500,000ton /year 3-project technology:hot air boiling furnace technology.
This project is one of our domestic projects with a large capacity of 400,000 tons. The raw material is chemical gypsum powder, and use the production process of hot air boiling furnace.
This customer's factory is only 1 hour away from our company, and now he is currently building a second production line and its annual production capacity can be 500,000 tons.
Actually we have succeeded more than 40 similar projects in our country.

 

                                                                                               

After Sales Service

One stop service to guarantee you a 100% sucessful project 

1) We will make factory layout after client  got final dimensions  of land. 

2)  After order confirm we will provied CAD  foundation drawing for carry on civil work,if necessary  one civil engineer can be despatch to guide for civil work

3)Provide formular and production tecnology :Our engineers will adjust the formular according to your local raw material 

4) we  will make commisionning and make training for worker until they occupy operate the equipment and produce qualified product   

5) Your enginiers can stay from 6-12 monthes after operation start  
if necessary ,we can arrange one engineer stay in your factory to guide production and management , the buy need pay  the engineer salary  on time . 

6) after project finished , if necessary ,also we can arrange one engineer stay in your factory to help produce and manage the plant . 

 

FAQ

 

Q	How many projects have you installed?
A	we have installed over 100projects in domestic and abroad.
Q	How many years experience do you have in mgo field?
A	Our general engineer has around 20years experience; all others have over 10years experience.
Q:	Do you supply spare parts?
A:	Excellent easy broken parts support for buyers. Easy broken parts guarantee for one year.
Q:	Will you provide trainning?
A:	The training is free of charge , and our engineer will be on duty to train your worker.
Q:	How will you provide installation&commissioning?
A:	Will provide 2~4persons(adjustable according to the degree of automatic )for installation.

Company advantages & Contact
Rich experience
We have rich experience in gypsum board making equipment field. Our general engineer has over 20years experience, other main engineers all have over 10years experience, proficient in the newest gypsum board manufacturing plant design and manufacturing. With over 100 projects in domestic and abroad markets, we can ensure you a successful project. 

Professional teamwork
1.Sales team: 24hours online for you
2. Designing team: design the best layout for you
3. Manufacturing team: promise the best quality with high precision
4. Installation & commissioning team: finish the installation and testing of whole line
5. Process team: promise you the qualfied formula.

Excellent Service
Our company provides full life-cycle value services for gypsum board making equipment design, cost accounting, installation and operation, equipment maintenance and the whole life cycle technical support